LK-JL
Meter box
Installation method | Installation method
◆LK-JL meter box can be installed in hanging or floor-standing.
◆In order to ensure the installation quality, the hanging box must be fixed with built-in expansion bolts, and the size of the bolts meets the requirements of safety and firmness and outdoor installation conditions.
Conditions of use | Conditions of use
◆Altitude: < 1000m;
◆Ambient temperature: -10~+45°C, limit working temperature range: -15~+55*C;
◆ Relative humidity: at +20°C, it should not be higher than 90; at +45°C, it should not be higher than 50;
◆Protection level: not lower than IP34d outdoors, not lower than IP20 indoors;
◆Rated voltage: below 500V;
◆Rated current: single-phase or three-phase direct-entry type, the load current of each household is not more than 40a;
◆Rated edge voltage: 660V.
Arrangement matters | Arrangement matters
◆For the direct access type, the incoming switch room, metering room and appearance switch room must be set up;
◆The line switch room, the transformer room, the measurement room and the appearance switch room must be set up for the connection via the transformer. Each functional area is independent and separated;
◆The electric energy meter and the electricity information collection terminal should be installed on the fixed fixture, mounting frame or grid plate respectively;
◆The horizontal distance between the electric energy meter and the electric energy meter is not less than 30mm, and the vertical distance is not less than 80mm;
◆The distance between the test junction box, electric energy meter, power consumption information collection terminal and the shell shall not be less than 60mm;
◆The distance between the front of the electric energy meter and the observation window should be between 15-20mm.
Recommended products
Metal armored central switchgear
Vacuum ring network cabinet
SF6 ring network cabinet
Intelligent Solid Insulation Ring Main Unit
Feedback
Website QR code
Lonka electric (Xiamen) Co., Ltd.
Hotline: +86-18059898311
Tel: +86-592-5701130
Fax: +86-592-5701131
E-mail: lhp@xmlonka.com
Add: 1st floor, No. 116, Houtang Road, Huli District, Xiamen, Fujian, China